Enter your keyword

PRETREAT 6332 ( CHLORINATING AGENT )

PRETREAT 6332 ( CHLORINATING AGENT )

Product Description Pretreat 6332 is a unique and rich blend of broad spectrum, high performance Oxidizing biocides to control all kinds of bacterial species commonly encountered in industrial cooling systems and keeps the heat transfer surfaces clean form organic and biological fouling. Applied along with a Biodispersant, the product ensures complete control against bio fouling. The product is specially designed for total control of anaerobic bacteria like SRB, Algae and Nitrifying bacteria. It is a strong chlorinating Agent used for algae control in industrial water systems, effluent treatment and disinfection of septic tanks and also used for swimming pool treatment. It has low hygroscopicity and shows a stable disinfectant effect over several days weeks contains no insoluble matter and completely dissolved. It is very economical because of its appropriate dissolving speed.
Typical Dosage Pretreat 6332 is known to be effective in the dose range of 10 to 30 ppm in most cases. In systems, which are being commissioned afresh or already badly fouled, an initial shock dose of 100 ppm is recommended. However, the required dose levels for individual systems shall be recommended by Sri Amman chemicals technical representatives.
Handling & Safety Pretreat 6332 should be handled like any other industrial chemical such as, acids or alkalis. Safety shoes, gloves and face masks should be worne while handling the product. Direct contact with skin should be avoided. In case of accidental splash, wash the affected area with plenty of fresh water and get immediate medical attention. In case of spills, wash the area with plenty of water.
Environmental safety Pretreat 6332 contains ingredients, which are non toxic and non polluting at suggested use levels. They are auto degradable and bio degradable. Water treated with Pretreat 6332 can be safely discharged into any waste stream, without need for any post treatment.
Storage Pretreat 6332 should be stored in a cool, dry place, away from direct sunlight, sources of heat or moisture.
Shipping Pretreat 6332 is shipped in 50kgs HDPE containers

Important: Information given above are in good faith and for the benefit of the user only. Physical properties are indicative and are to vary. However, this shall not influence the product performance.

POST YOUR COMMENT