PRETREAT 6382 ( NON OXIDIZING BIOCIDE )
|Product Description||Pretreat 6382 is a specific blend of biocide based on organic compounds for effective control of algae, fungi and general type of bacteria found in cooling systems. The active biocide causes stress on cell death.|
|Physical Properties||pH (Neat): 1% soln. in distilled water): Alkaline>10
Form: Clear,reddish brown, homogeneous liquid
Sp., Gravity: 1.05+/-1.15
Solubility: Soluble in water in all proportions.
|Typical Dosage||Pretreat 6382 is known to be effective in the dose range of 75 to 150 ppm in most cases. In systems, which are being commissioned afresh or already badly fouled, will need higher dosage or precleaning. However, the required dose levels for individual systems shall be recommended by Sri Amman chemicals technical representatives.|
|Handling & Safety||Pretreat 6382 should be handled like any other industrial chemical such as, acids or alkalis. Safety shoes, gloves and face masks should be worne while handling the product. Direct contact with skin should be avoided. In case of accidental splash, wash the affected area with plenty of fresh water and get immediate medical attention. In case of spills, wash the area with plenty of water.|
|Environmental safety||Pretreat 6382 contains ingredients, which are non toxic and non polluting at suggested use levels. They are auto degradable and bio degradable. Water treated with Pretreat 6382 can be safely discharged into any waste stream, without need for any post treatment.|
|Storage||Pretreat 6382 should be stored in a cool, dry place, away from direct sunlight, sources of heat or moisture.|
|Shipping||Pretreat 6382 is shipped in 50/35 liters HDPE containers|
Important: Information given above are in good faith and for the benefit of the user only. Physical properties are indicative and are to vary. However, this shall not influence the product performance.