Enter your keyword

PRETREAT 9792 ( CORROSION INHIBITOR FOR SULPHURIC ACID )

PRETREAT 9792 ( CORROSION INHIBITOR FOR SULPHURIC ACID )

Product Description Pretreat 9792 is an Antiscalent that controls scale formation in distillery Rectifier column and is normally added to the wash fed o distillation column Just before or enter the column. Pretreat 9792 exhibits excellent control of calcium carbonate, calcium sulfate, calcium phosphate, calcium oxalate and silica scales. It is a powerful sequstrant of Cations. It forms water soluble complexes with scale forming ions like iron, calcium, magnesium etc. and is effectively controls the deposition of suspended matter like dirt, dust, clay, etc. by its strong dispersing ability.
Physical Properties pH (Neat): Acidic <4
Form: Clear reddish brown liquid
Wt/ml: 1.0 – 1.2
Odour: Characteristic
Solubility: Soluble in water in all proportions
Typical Dosage Pretreat 9792 is known to be effective in the dose range of 5 to 25 ppm in most cases. However, the required dose levels for individual systems shall be recommended by Sri Amman chemicals technical representatives.
Handling & Safety Pretreat 9792 should be handled like any other industrial chemical such as, acids or alkalis. Safety shoes, gloves and face masks should be worne while handling the product. Direct contact with skin should be avoided. In case of accidental splash, wash the affected area with plenty of fresh water and get immediate medical attention. In case of spills, wash the area with plenty of water.
Environmental safety Pretreat 9792 contains ingredients, which are non toxic and non polluting at suggested use levels. They are auto degradable and bio degradable. Water treated with Pretreat 9792 can be safely discharged into any waste stream, without need for any post treatment.
Storage Pretreat 9792 should be stored in a cool, dry place, away from direct sunlight, sources of heat or moisture.
Shipping Pretreat 9792 is shipped in 50/35 liters HDPE containers

Important: Information given above are in good faith and for the benefit of the user only. Physical properties are indicative and are to vary. However, this shall not influence the product performance.

POST YOUR COMMENT